Car film knowledge
08/09/2022
(1) The concept of car color changing film
A film with rich colors and various colors that changes the appearance of the whole or part of the car by covering and pasting it throughout the rest period is called car body color changing film.
(2) Characteristics of car color changing film
The whole film is covered without splicing, no seams, no traces, with air guide, no need to worry about air bubbles, and also ensures the integrity of the car surface. It does not shrink after setting at room temperature), which can show ideal tortuosity on a smaller arc surface, and the bonding force is more durable. Nano-level production process, the product is delicate and compact, with strong anti-wear and durable performance, long-lasting and stable color sense, no discoloration or fading, and a service life of up to 5 years. Unique brightening coating, brightening and translucent, durable and natural, integrated with the original car, fully showing the texture of the car paint. It can resist most petroleum, grease, fuel, fatty solvent, weak acid, weak base, weak salt, and completely isolate continuous damage such as acid rain, gravel bird droppings, grease, etc. The super toughness and resilience are increased by more than 10 times, and the small scratches are automatically bridged, and it is extremely resistant to general scratches, rubbing and abrasion. Refract and filter harmful light, prevent the damage caused by strong light and UV to the car paint, and protect the gloss and durability of the original car paint. It can adapt to temperature difference from -40℃ to +90℃, has good heat insulation and inert temperature conduction effect, and is flame retardant in yin fire.
2. Comparison of traditional car color changing and pasting color changing film
(1) Traditional body color change
The traditional body color change is achieved by painting the whole car. When painting the whole car, there are many parts that need to be disassembled, and the damage of the parts will increase. The original paint should be ground off before painting, and we all know that the original paint is sprayed through strict procedures and special construction conditions, and the quality of the later sprayed paint is the same as the original car paint due to the influence of the baking paint temperature and other factors. The ratio is also far behind. After a period of time, the texture is easy to quickly fade away, and local aging, peeling, wind erosion, cracks, and shell jumping occur. In the future, when the car is sold, the car will depreciate a lot because the paint is not the original paint. Color difference will occur during partial painting, and the construction period for painting the whole vehicle is long, generally 5 to 7 days. And spray paint will pollute the environment.
(2) Change the color of the color film
Change the color of the car body by sticking the car body color film, as long as fewer parts are removed. The original car paint can be retained, and the car will not be depreciated due to the car paint when it is necessary to sell the car in the future. When the car paint is partially damaged, the damaged part can be covered by partially pasting the car body color change film. After the partial film is applied, there will be no visible color difference. When the car body color needs to be changed to a special effect (such as: matt) , The film is more stable and effective than spray painting, and the price is lower. The construction period of the whole car film is shorter, only 2 to 3 days. The car film products are non-toxic and green approved by the European Union, and the filming process will not pollute the environment.
3. The role of car color changing film.
(1) Dynamic fashion: reflect the uniqueness of the car and show individuality.
More and more young people have a unique pursuit of the shape of the car. The pursuit of distinctive personality, like to be unconventional, the pursuit of fashion personality and pragmatism at the same time, who doesn’t want their car to look different? Showing personality has gradually become a major trend in car culture, and sticking car body color film is even more a fashion. Nowadays, car film color change has become the most popular modification form and way of showing personality in the modification market.
(2) The color is arbitrary, any color, can be changed at will, the texture can be combined at will, and the parts of the whole vehicle can be pasted and changed at will.
There are even more color types of car body color film than hair dyes. Going to a car beauty shop to apply a color change film is like going to a hair salon to dye your hair. The choice of a single color can turn your car upside down. You can change the Jetta body to red, you can turn the bumblebee into a bumblebee, bumblebee. If you don't like to change the color, you can stick a transparent film to reveal the original color of your car, and stick it on the glass to increase the light transmittance. Or a single color is not your personality, then you can combine it at will, and you can make a cute rearview mirror for the Beetle. Feel free to paste and replace as you like.
(3) Protect the car paint: prevent scratches and rub, and preserve the brilliance of the original car paint surface.
A car with a color-changing film is like wearing a layer of clothing. Directly, the original car paint surface is sealed, which can prolong the life of the paint surface. It indirectly protects the paint surface from some external damage, such as scratches. When the color-changing film is used for a certain period of time, you can ask the master to remove the film. The paint surface after removal is not much different from that before the film was applied, and the brilliance of the original car paint surface is well preserved.
(4) Replace if you want: no glue residue after removal, no adhesion residue, and no damage to the original car paint.
When you are not satisfied with the original film before the end of the life of the color-changing film, you can take it off at any time. After the car color changing film is removed, it will not leave any damage to the original car paint, and even glue residue will not be left behind. Whenever you want to change the membrane, even if you are not satisfied on the spot, you can replace it immediately, which is easy and safe.
4. Selection of car color changing film
With the rise of the car body film color change project, the market is mixed, and all kinds of fake and shoddy products have also surfaced. A good film has good ductility, will not break when stretched, and will not have color difference. The other is the back glue. The film shrinks back when stretched, but the back glue remains on the body, which makes the body look particularly dirty. For a good film, the adhesive may not be very sticky when it is applied, but it becomes very sticky after 24 hours of pasting. This kind of professionally called "low-touch viscosity" is a more professional term, so this The film is more technical on the adhesive. The following three tricks can identify the quality of the car body color changing film.
At first glance, the surface of a good car body film is smooth and delicate, the color is saturated and even, there is no impurity feeling, the covering effect is tight, and there are no cracks, wrinkles and warping problems. Poor-quality car body films are often grainy, rough in color, poor in saturation, prone to cracks during the coating process, poor in adhesive backing, poor in compliance, and easy to warp.
Second touch, the high-quality film is soft and tough, the film surface is fine, the thickness is suitable, it is not easy to appear creases, the quality of the backing paper is good, the inferior film material is hard and heavy, the roughness is obvious, the lack of toughness, the creases are not easy to recover, the quality of the backing paper Difference.
Three smells, high-quality car stickers have strictly implemented global environmental protection requirements, no irritating odor. The lower quality membrane smells very pungent and has lower environmental performance.
5. Maintenance after car color changing film
(1) In the early stage after the construction is completed, the adhesion of the film is low, do not touch it, especially the edge part.
(2) Avoid scratching the film with hard objects and vigorously scrubbing the surface of the film. The scratches and numb marks will affect the rest effect of the film.
(3) When cleaning the vehicle, avoid the use of brushes and corrosive chemicals, and only need to wash the car daily. When washing the car, it is recommended to use a neutral liquid for cleaning.
(4) Avoid parking near bushes or other places that are easily scratched to the paint surface when parking.
(5) Use non-abrasive, strong solvent-free cleaning agent with pH value between 3-11.
(6) Rinse with clean water after cleaning and dry with a clean, soft cloth or rubber scraper to prevent residual water.
(7) Do not wax or polish the film surface. If wax spots remain on the surface of the film, you can use clean water to clean it.
(8) Avoid rinsing the edge of the membrane with a high-pressure water gun when washing the car.
(9) Avoid car washing and sun exposure within a week after the film is applied to ensure the best bonding force between the glue and the paint surface.
